Support for large fields (size > 32K) for Rich Display File
This feature is available with Profound UI releases later than Version 6 Fix Pack 3.3.
Since the limit for DDS record size is 32K, Profound UI provides a procedure called profoundui_overrideValue() as an alternative way to send data for very large fields (size greater than 32K) to a Rich Display File. This procedure can also be used to address the issue where the individual fields have sizes less than 32K, but the combined size of the record format is greater than 32K. The procedure prototype is defined in /COPY member PROFOUNDUI/QRPGLEINC, PUIRDF. The procedure is exported from service program PROFOUNDUI.
The prototype is shown below:
D* procedure to override field data, from *SRVPGM PROFOUNDUI
D profoundui_overrideValue...
D pr ExtProc('profoundui_overrideValue')
D FileName * value options(*string:*trim)
D RecordName * value options(*string:*trim)
D FieldName * value options(*string:*trim)
D Data * value options(*string)
D DataLen 10i 0 value
How to use this procedure:
Include /COPY member PROFOUNDUI/QRPGLEINC, PUIRDF in your progarm.
Define the field with a small size (less than 32K) in your Rich Display File. The objective is to define the large fields with "dummy" small sizes so that the total size of the record format will be less than 32K so that the Rich Display File can be compiled.
In your program, before a WRITE or EXFMT, call procedure profoundui_overrideValue() to indicate to the Profound UI handler to use the data specified on the procedure call (instead of the data in the DDS record) for the specified field and record format. Use the parameters “Data” and “DataLen” to point to the location and length of the data.
Compile and run your program with service program PROFOUNDUI in the library list.
At WRITE or EXFMT time, the Profound UI handler will send that data to the Rich Display File for that field in that record format.
Example program of how this procedure is used:
Suppose you have a customer address file CUSTADRP with the following fields
CUSTNO: zoned(4:0)
NAME: char(30)
STREET: char(30)
CITY: char(20)
STATE: char(2)
POSTAL: char(10)
The fields NAME, STREET, CITY are defined on the Rich Display File with "dummy" small sizes of char(30), char(30), char(20), respectively.
You want to send very large data (> 32K) for those fields to the Rich Display File at WRITE or EXFMT time.
The example program uses procedure profoundui_overrideValue() to override the value for those fields (NAME, CITY, STREET), using data from the big fields “bigName”, “bigStreet”, “bigCity”, before doing WRITE or EXFMT to the record format,
The large fields can be type CHAR, VARCHAR, or CLOB, as shown in the example.
/DEFINE PROFOUNDUI
FCUSTADRP if e k disk
FMYFILE CF E WorkStn Handler('PROFOUNDUI(HANDLER)')
/COPY QRPGLEINC,PUIRDF
dcl-s bigName char(35000);
dcl-s bigStreet varchar(40000);
dcl-s bigCity sqlType(clob: 45000);
dcl-s temp char(37000);
dcl-s fileName char(10) inz('MYFILE');
// main()
custno = 1234;
chain custno custadrp;
if %found(custadrp);
// Override fields NAME, STREET, CITY, to use large fields
// char(35000) field; use %addr(field) for Data, -1 for DataLen for 0-terminated
// string, 34K bytes
bigName = *all'X';
%subst(bigName: 1: 5) = 'START';
%subst(bigName: 34000-3+1: 3) = 'END';
%subst(bigName: 34000+1 : 1) = x'00';
profoundui_overrideValue('MYLIB/MYFILE': 'FM01': 'name': // fileName can be qualified name
%addr(bigName ): -1 ); // -1 for 0-terminated
// varchar(40000) field; use %addr(field:*data) for Data, %len(field) for DataLen
temp = *all'Y'; // 37K
bigStreet = temp; // use 37K of 40K
%subst(bigStreet: 1: 5) = 'START';
%subst(bigStreet: 37000-3+1: 3) = 'END';
profoundui_overrideValue(fileName: 'FM01': 'street':
%addr(bigStreet:*data): %len(bigStreet));
// clob(45000) field; use %addr(field_data) for Data, field_len for DataLen
exec SQL select BIGCITY
into :bigCity
from CUSTADRP2
where custno = :CUSTNO;
if sqlCode <> 0;
bigCity_data = 'bigCity not found in CUSTADRP2';
bigCity_len = %len(%trim(bigCity_data));
endif;
profoundui_overrideValue(fileName: 'FM01': 'city':
%addr(bigCity_data): bigCity_len);
exfmt FM01;
endif;
*InLr = *On;
Return;
As an example, the bound field "NAME" is defined in the Rich Display File as char(30). However, at run time, procedure profoundui_overrideValue() is used to send 34K bytes of data for that field to the browser, to be displayed. Bound field "STREET" is defined as char(30), but 37K of data will be sent for that field. Bound field "CITY" is defined as char(20), but 45K of data will be sent for that field.
Example screen output:
Some documentation pages have recently moved to a new section: Profound AppDev. If you are having trouble finding specific pages, try the documentation search capability or reach out to our Support team!